DELTRONIC Stock Gage Sizes CLASS X
DELTRONIC Stock Gage Sizes CLASS X2

DELTRONIC Stock Gage Sizes CLASS X

0 out of 5

$17.00 – $24.00

GENERAL ORDER INFORMATION

TOTAL-ORDER PRICES
Total all of the gages on your order (may be mixed sizes) to find the price of each size. Example: if you have a total of more than ten gages on your order, use the price column under the heading “10-up” to price each gage, according to size.

HANDLING FEES
For orders less than $80.00 and Will Calls, a $10.00 Handling Fee will be applied.

GO/NO-GO SELECTION
All class “X” Deltronics have one tolerance (+ .000,040”, minus nothing). When ordering for critical hole checking (tenths tolerance) select a No-Go diameter .0001” smaller than usual.

Specify your Go Gage to take advantage of the maximum wear allowance. MIL-STD-120 allows 5-10% of total part tolerance as Go gage wear allowance (ordnance std. 5%). Deltronic’s tenth step availability encourages selection of best Go size for maximum gage life. If hole is .2500”, with a tolerance of +.001”, minus nothing, add .0001” to Go size as wear allowance and order a .2501” Deltronic.

*BULK PACKAGING
To qualify for bulk packaging, the order must be for a minimum of ten gages of each size and include not less than 50 gages total. All the gages of one size are packaged together in clear plastic, with one certificate per size.
Bulk packaging is ideal for production inspection requirements where quantities of each gage size are needed but where there is no use for individual box packaging gage certification. The lower per-gage cost for bulk packaging is shown above. In repetitive production gaging applications, it is usually possible to anticipate gage wear/life (i.e., the number of parts checked with the gage remaining in tolerance). At the end of the in tolerance period, gages can be simply discarded and replaced with new members, thereby entirely bypassing the cost of cycle calibration. Here is a big potential additional savings in the use of these “Bulk Packaged” gages

SKU: N/A
Clear
Add to wishlist

Description

GENERAL ORDER INFORMATION

TOTAL-ORDER PRICES
Total all of the gages on your order (may be mixed sizes) to find the price of each size. Example: if you have a total of more than ten gages on your order, use the price column under the heading “10-up” to price each gage, according to size.

HANDLING FEES
For orders less than $80.00 and Will Calls, a $10.00 Handling Fee will be applied.

GO/NO-GO SELECTION
All class “X” Deltronics have one tolerance (+ .000,040”, minus nothing). When ordering for critical hole checking (tenths tolerance) select a No-Go diameter .0001” smaller than usual.

Specify your Go Gage to take advantage of the maximum wear allowance. MIL-STD-120 allows 5-10% of total part tolerance as Go gage wear allowance (ordnance std. 5%). Deltronic’s tenth step availability encourages selection of best Go size for maximum gage life. If hole is .2500”, with a tolerance of +.001”, minus nothing, add .0001” to Go size as wear allowance and order a .2501” Deltronic.

*BULK PACKAGING
To qualify for bulk packaging, the order must be for a minimum of ten gages of each size and include not less than 50 gages total. All the gages of one size are packaged together in clear plastic, with one certificate per size.
Bulk packaging is ideal for production inspection requirements where quantities of each gage size are needed but where there is no use for individual box packaging gage certification. The lower per-gage cost for bulk packaging is shown above. In repetitive production gaging applications, it is usually possible to anticipate gage wear/life (i.e., the number of parts checked with the gage remaining in tolerance). At the end of the in tolerance period, gages can be simply discarded and replaced with new members, thereby entirely bypassing the cost of cycle calibration. Here is a big potential additional savings in the use of these “Bulk Packaged” gages

Additional information

SKU

CLASS “X” GAGES (.0040” – .0150”.1000mm -.3800mm), CLASS “X” GAGES (.0151” – .0247”.3825mm – .6275mm), CLASS “X” GAGES (.0248” – .1080”.6300mm – 2.7425mm), CLASS “X” GAGES (.1081” – .3872” 2.7450mm – 10.0350mm), CLASS “X” GAGES (.3873” – .6375” 10.0375mm – 16.1925mm)