![Carr Lock® Fixture Plate 500 x 500mm](https://www.baycitiestool.com/wp-content/uploads/2023/11/Carr-Lock®-Fixture-Plate-500-x-500mm.png)
![](https://www.baycitiestool.com/wp-content/uploads/2023/11/Carr-Lock®-Fixture-Plate-500-x-500mm1.png)
![](https://www.baycitiestool.com/wp-content/uploads/2023/11/Carr-Lock®-Fixture-Plate-500-x-500mm3.png)
![Carr Lock® Fixture Plate 500 x 500mm](https://www.baycitiestool.com/wp-content/uploads/2023/11/Carr-Lock®-Fixture-Plate-500-x-500mm.png)
![Carr Lock® Fixture Plate 500 x 500mm1](https://www.baycitiestool.com/wp-content/uploads/2023/11/Carr-Lock®-Fixture-Plate-500-x-500mm1.png)
![Carr Lock® Fixture Plate 500 x 500mm3](https://www.baycitiestool.com/wp-content/uploads/2023/11/Carr-Lock®-Fixture-Plate-500-x-500mm3.png)
Carr Lock® Fixture Plate 500 x 500mm
$790.06 $690.06
Carr Lock® Fixture Plates
Carr Lock® Fixture Plates are precision-machined MIC-6 cast aluminum plates available in a wide range of standard sizes to use as a base for building quick-change fixtures. To fasten the Carr Lock® Fixture Plate to a subplate, begin by inserting a Carr Lock® Clamp into each of the four corner holes. Next, fully tighten the clamps one at a time – first the clamp in the primary liner bushing, then the clamp in the secondary liner bushing, then the clamps in the clearance holes. Made in USA.
These 500 x 500mm fixture plates have four 25mm mounting holes – a primary liner, a secondary liner, and two clearance holes. They also have two fixture-key holes for conventional mounting directly on a slotted machine table using Sure- Lock™ Fixture Keys.
- Description
- Store Policies
Description
Carr Lock® Fixture Plates
Carr Lock® Fixture Plates are precision-machined MIC-6 cast aluminum plates available in a wide range of standard sizes to use as a base for building quick-change fixtures. To fasten the Carr Lock® Fixture Plate to a subplate, begin by inserting a Carr Lock® Clamp into each of the four corner holes. Next, fully tighten the clamps one at a time – first the clamp in the primary liner bushing, then the clamp in the secondary liner bushing, then the clamps in the clearance holes. Made in USA.
These 500 x 500mm fixture plates have four 25mm mounting holes – a primary liner, a secondary liner, and two clearance holes. They also have two fixture-key holes for conventional mounting directly on a slotted machine table using Sure- Lock™ Fixture Keys.
Related Products
-
-
-
Jigs & Fixture Tooling
Standard Spring plungers ( Steel/Stainless steel metric)
0 out of 5 -
-
-
-