Carr Lock® Subplates 16 x 26 For HAAS® VF-1YT
$2,595.82
System Kits include everything you need to set up an efficient quick-change fixturing system. Kits include a Carr Lock® subplate, one or more Carr Lock® Fixture Plates, plus all required Carr Lock® Clamps and subplate-mounting components (Sure-Lock™ Fixture Keys, T Nuts, and Socket-Head Cap Screws).
Carr Lock® Subplates are precision-machined steel plates with Carr Lock Receiver Bushings installed
in a standard pattern. These subplates serve as the foundation of an efficient quick-change fixturing
system. The 16 x 26 subplates shown here have either (12) or (8) 20mm Face-Mount Receiver Bushings, depending on the version, to allow mounting a variety of Fixture Plates and vise plates. Subplates should generally be large enough to cover most of the machine table, for maximum fixture flexibility, but should never extend beyond the machine table. For maximum quick-change benefits, subplates are usually left permanently on
the machine table while only the mounted fixtures or vises are exchanged. The Carr Lock® System is extremely accurate. All Receiver-Bushing installation holes are located +/-.0002″ from their primary reference hole. Clamping repeatability is +/-.0005″, while bushing concentricity is .0002″ TIR. The resulting x/y-axis repeatability of a mounted fixture plate is +/-.0028″ considering all tolerance accumulation. Made in USA.
- Description
- Store Policies
Description
System Kits include everything you need to set up an efficient quick-change fixturing system. Kits include a Carr Lock® subplate, one or more Carr Lock® Fixture Plates, plus all required Carr Lock® Clamps and subplate-mounting components (Sure-Lock™ Fixture Keys, T Nuts, and Socket-Head Cap Screws).
Carr Lock® Subplates are precision-machined steel plates with Carr Lock Receiver Bushings installed
in a standard pattern. These subplates serve as the foundation of an efficient quick-change fixturing
system. The 16 x 26 subplates shown here have either (12) or (8) 20mm Face-Mount Receiver Bushings, depending on the version, to allow mounting a variety of Fixture Plates and vise plates. Subplates should generally be large enough to cover most of the machine table, for maximum fixture flexibility, but should never extend beyond the machine table. For maximum quick-change benefits, subplates are usually left permanently on
the machine table while only the mounted fixtures or vises are exchanged. The Carr Lock® System is extremely accurate. All Receiver-Bushing installation holes are located +/-.0002″ from their primary reference hole. Clamping repeatability is +/-.0005″, while bushing concentricity is .0002″ TIR. The resulting x/y-axis repeatability of a mounted fixture plate is +/-.0028″ considering all tolerance accumulation. Made in USA.
Related Products
-
-
-
Clamping Accessories, Jigs & Fixture Tooling
CAPTIVE LOCATING SCREWS(Socket Head)
0 out of 5 -
-
-