CARR LOCK® SYSTEM (LINER BUSHINGS)
$15.88 – $16.98
LINER BUSHINGS
Each top plate should have one Primary Liner, and one Secondary Liner or Slotted Locator Bushing. Primary Liners have a tight ID (+.0002/+.0007 tolerance) for precise reference in two axes. Secondary Liners have an extra .001” ID clearance (+.0012/+.0017 tolerance) to avoid binding. Slotted Locator Bushings provide better accuracy than Secondary Liners, but take a few extra steps to install. Slotted Locators have a tight ID tolerance in one direction and full relief in the perpendicular direction (available only in 16mm, 20mm, and 25mm diameters). Note: alternatively, two Primary Liners can be used for alignment if hole locations are held to ±.0002 inches.
- Description
- Additional information
- Store Policies
Description
LINER BUSHINGS
Each top plate should have one Primary Liner, and one Secondary Liner or Slotted Locator Bushing. Primary Liners have a tight ID (+.0002/+.0007 tolerance) for precise reference in two axes. Secondary Liners have an extra .001” ID clearance (+.0012/+.0017 tolerance) to avoid binding. Slotted Locator Bushings provide better accuracy than Secondary Liners, but take a few extra steps to install. Slotted Locators have a tight ID tolerance in one direction and full relief in the perpendicular direction (available only in 16mm, 20mm, and 25mm diameters). Note: alternatively, two Primary Liners can be used for alignment if hole locations are held to ±.0002 inches.
Additional information
| SKU | CL-13-CLPL-0.50, CL-13-CLPL-0.75, CL-16-CLPL-0.50, CL-16-CLPL-0.75, CL-20-CLPL-0.75 |
|---|
