CARR LOCK® SYSTEM (Carr Lock® Clamp)
$85.09 – $91.72
The Carr Lock® System allows accurately locating and clamping at the same time, with just the turn of a hex wrench. Ideal for mounting quick-change tooling on a subplate. Each mount consists of three components: (1) a Carr Lock® Clamp with a precisely ground shank; (2) a Liner Bushing in the top plate; (3) a Receiver Bushing in the subplate. This compact assembly provides considerable holddown force, together with an incredible ±.0005 inches repeatability! Each top plate should have one Carr Lock® Clamp designated as its primary reference point, and one as its secondary reference point. These two clamps should be as far apart as possible. The secondary reference point should have a relieved liner to avoid redundant location (binding). Additional Carr Lock® Clamps can be used for more clamping force, but these should be installed in clearance holes, not locating liners. Note that the same Carr Lock® Clamp fits any type of liner or a clearance hole. Carr Lock® Clamps must be used with one of the Receiver Bushings (INFO+) on page 356. Plate thickness must be ±.005 inches to
achieve proper clamping force. Special grip lengths for other plate thicknesses are available as specials. Do not exceed maximum screw torque shown.
- Description
- Additional information
- Store Policies
Description
The Carr Lock® System allows accurately locating and clamping at the same time, with just the turn of a hex wrench. Ideal for mounting quick-change tooling on a subplate. Each mount consists of three components: (1) a Carr Lock® Clamp with a precisely ground shank; (2) a Liner Bushing in the top plate; (3) a Receiver Bushing in the subplate. This compact assembly provides considerable holddown force, together with an incredible ±.0005 inches repeatability! Each top plate should have one Carr Lock® Clamp designated as its primary reference point, and one as its secondary reference point. These two clamps should be as far apart as possible. The secondary reference point should have a relieved liner to avoid redundant location (binding). Additional Carr Lock® Clamps can be used for more clamping force, but these should be installed in clearance holes, not locating liners. Note that the same Carr Lock® Clamp fits any type of liner or a clearance hole. Carr Lock® Clamps must be used with one of the Receiver Bushings (INFO+) on page 356. Plate thickness must be ±.005 inches to
achieve proper clamping force. Special grip lengths for other plate thicknesses are available as specials. Do not exceed maximum screw torque shown.
Additional information
SKU | CL-13-CLC-0.50, CL-13-CLC-0.7, CL-16-CLC-0.50, CL-16-CLC-0.75, CL-20-CLC-0.75 |
---|
Related Products
-
-
-
Jigs & Fixture Tooling
Standard Spring plungers (Delrin nose plungers metric)
0 out of 5 -
Jigs & Fixture Tooling
Standard Spring plungers ( phenolic and delrin nose plungers)
0 out of 5 -
Jigs & Fixture Tooling
Standard Spring plungers ( Steel body with stainless steel nosel)
0 out of 5 -
Clamping Accessories, Jigs & Fixture Tooling
CAPTIVE LOCATING SCREWS(Socket Head)
0 out of 5 -