LOCKING CLAMPING PINS
$32.01 – $32.33
Locking Clamping Pins are similar to standard Clamping Pins, except that the pin body is positively retained in a locking bushing. In fully retracted position, the bushing’s spring clip snaps into the pin’s radial groove. This holds the pin fully retracted by spring force and positively prevents removal. Spring pressure also holds the pin in intermediate extended positions, an advantage especially if the fixture is turned upside down. These threaded alignment pins can be used for locating and clamping, or for clamping only, depending on extended screw length. The upper bushing is furnished separate from the pin, and must be welded in place at the proper length to suit the application. Available in thread sizes from 1/4-20 to 1/2-13 (M6 to M12 in metric). Locking-Pin Bushings are designed to press fit in a standard reamed hole. Secure with the included Lockscrew to positively hold the bushing in place. Shorter or longer bushings are available in most sizes, for thinner or thicker plates.
- Description
- Additional information
- Reviews (0)
- Store Policies
Description
Locking Clamping Pins are similar to standard Clamping Pins, except that the pin body is positively retained in a locking bushing. In fully retracted position, the bushing’s spring clip snaps into the pin’s radial groove. This holds the pin fully retracted by spring force and positively prevents removal. Spring pressure also holds the pin in intermediate extended positions, an advantage especially if the fixture is turned upside down. These threaded alignment pins can be used for locating and clamping, or for clamping only, depending on extended screw length. The upper bushing is furnished separate from the pin, and must be welded in place at the proper length to suit the application. Available in thread sizes from 1/4-20 to 1/2-13 (M6 to M12 in metric). Locking-Pin Bushings are designed to press fit in a standard reamed hole. Secure with the included Lockscrew to positively hold the bushing in place. Shorter or longer bushings are available in most sizes, for thinner or thicker plates.
Additional information
SKU | CL-1-LCP-B, CL-1-LCP-B-2, CL-2-LCP-B-1, CL-2-LCP-B, CL-2-LCP-B-3 |
---|
Be the first to review “LOCKING CLAMPING PINS” Cancel reply
You must be logged in to post a review.
Related Products
-
-
Jigs & Fixture Tooling
Standard Spring plungers (Delrin nose plungers metric)
0 out of 5 -
Jigs & Fixture Tooling
Standard Spring plungers ( Steel body with stainless steel nosel)
0 out of 5 -
Clamping Accessories, Jigs & Fixture Tooling
CAPTIVE LOCATING SCREWS(Socket Head)
0 out of 5 -
-
-
Reviews
There are no reviews yet.