![F305_main_800x](https://www.baycitiestool.com/wp-content/uploads/2023/11/F305_main_800x-600x600.jpg)
![](https://www.baycitiestool.com/wp-content/uploads/2023/11/fs05_alt_800x-1-600x600.jpg)
![](https://www.baycitiestool.com/wp-content/uploads/2023/11/sensor-hand-800x-3-600x600.jpg)
![](https://www.baycitiestool.com/wp-content/uploads/2023/11/sensor-closeup-800x-3-600x600.jpg)
![](https://www.baycitiestool.com/wp-content/uploads/2023/11/adapter_contacts_side_800x-1-600x600.jpg)
![F305_main_800x](https://www.baycitiestool.com/wp-content/uploads/2023/11/F305_main_800x.jpg)
![fs05_alt_800x-1](https://www.baycitiestool.com/wp-content/uploads/2023/11/fs05_alt_800x-1.jpg)
![sensor-hand-800x-3](https://www.baycitiestool.com/wp-content/uploads/2023/11/sensor-hand-800x-3.jpg)
![sensor-closeup-800x-3](https://www.baycitiestool.com/wp-content/uploads/2023/11/sensor-closeup-800x-3.jpg)
![adapter_contacts_side_800x-1](https://www.baycitiestool.com/wp-content/uploads/2023/11/adapter_contacts_side_800x-1.jpg)
Tension and Compression Force Sensors Series FS05
$1,225.00 – $1,730.00
Series FS05 force sensors measure tension and compression forces. They mount directly to the crosshead of models F105, F305, F505, and F505H test frames, for a clean, integrated look.
With Plug & Test® technology, all configuration and calibration data is saved within the sensor, allowing it to be calibrated on the test frame or off-site with a Mark-10 indicator (optional adapter: AC1083 required ). Ranges available from 0.12 to 500 lbF [0.5 N to 2.5 kN].
Note: An AC1083 adapter is required to use FS05 force sensors with the following test frames: F755, F755S, F1505, and F1505S.
- Description
- Additional information
- Store Policies
Description
Series FS05 force sensors measure tension and compression forces. They mount directly to the crosshead of models F105, F305, F505, and F505H test frames, for a clean, integrated look.
With Plug & Test® technology, all configuration and calibration data is saved within the sensor, allowing it to be calibrated on the test frame or off-site with a Mark-10 indicator (optional adapter: AC1083 required ). Ranges available from 0.12 to 500 lbF [0.5 N to 2.5 kN].
Note: An AC1083 adapter is required to use FS05 force sensors with the following test frames: F755, F755S, F1505, and F1505S.
Additional information
Weight | N/A |
---|---|
TYPE | Force sensor, 0.12 lbF / 2 ozF / 50 gF / 0.5 N / 500 mN, Force sensor, 0.25 lbF / 4 ozF / 100 gF / 1 N / 1000 mN, Force sensor, 0.5 lbF / 8 ozF / 250 gF / 2.5 N / 2500 mN, Force sensor, 2 lbF / 32 ozF / 1 kgF / 1000 gF / 10 N, Force sensor, 5 lbF / 80 ozF / 2.5 kgF / 2500 gF / 25 N |